AutoAqua Smart Stir

AutoAqua Smart Stir is a practical device that helps the aquarium keeper to analyse water accurately. Water analysis is an important part of a successful aquarium.

For an accurate test, most liquid test kits require the water sample to be mixed or shaken after adding a reagent. In some cases it is necessary to add one drop of reagent at a time, shake or stir in between until a colour change occurs. This can be time consuming and often results in reagents being added without proper mixing in between.

With the Smart Stir it is no longer necessary to shake the water sample between each step. Simply place the test bottle with the supplied stirrer in the device, press the button and the Smart Stir mixes the sample while adding the reagents. In addition, the white colour of the base allows you to see the colour change as it occurs.

Smart Stir has a built-in rechargeable lithium battery that can be easily recharged via the supplied USB cable when the low battery indicator lights up. To conserve battery power, the Smart Stir automatically turns off after 5 minutes.

DO NOT charge Smart Stir with a fast charger, or it may be damaged.

Smart Stir supports USB 5V charging only, but the output of the fast charger is higher than 5V and may damage the circuit board.

Specifications

- Charger: USB 5V

- Charging time: 120 minutes

- Battery life: 8 hours

- Dimensions: 70.5 x 70.5 x 59.5 mm (2.77 x 2.77 x 2.34 inch)

- Holder size: 27 mm diameter

- Size of stirring bar: 3 x 7 mm

Included in the box

- Smart Stir base

- Stirring bar

- USB charging cable

- Iron wire for taking out the stirring bar from the vial