Beyond the standard functionality of a TDS meter, which measures the total dissolved solids in the water flowing through it, the Reef Factory TDS Meter Plus has an added feature: it can send alerts when the TDS begins to rise. This is an indication that it may be time to either replace the resin in the DI stage or change out the pre-filters.

Maintain consistent temperature in your aquarium with the Reef Factory Thermo control smart temperature controller. The Thermo control is equipped with two outlets, one for a heater and the other for a cooling device such as a fan or chiller.

An advanced device for testing key water parameters in marine aquariums. This fully automated and precise tester provides instant and accurate results of the selected parameter, which can be easily accessed via the Smart Reef app. With the ability to schedule measurements and easily replace reagent cartridges, the Smart tester makes monitoring tank parameters a breeze. The device is designed so that calibration is rarely performed and cleaning is automatic, providing unparalleled convenience. From now on, not only will you be able to automate the testing of the selected parameter PO4, NO3, Mg, Ca, but also, with the help of actions that integrate the Smart tester with dosing pumps, automate the maintenance of the selected parameter at a certain level.

Level keeper is a device that is designed to maintain a constant water level in your aquarium by automatically replacing evaporated water. This not only eliminates the need for manual daily top-offs, but also helps to ensure stable salinity levels for the tank inhabitants.

Dosing pump ATO is a smart solution from Reef Factory designed for automatically topping up evaporated water in the aquarium. This incredibly precise tool is the result of combining an ultra-accurate pump with liquid level sensors. The Dosing pump ATO detects a drop in water level and automatically replenishes it, helping to maintain the desired salinity and stable parameters.

The Thermo view works like a traditional thermometer, but with smart features built-in. In addition to monitoring your aquarium’s water temperature, you can view the temperature data for your aquarium online or in the Reef Factory iOS/Android app. If the temperature falls outside of your specified safe limits, you’ll receive a notification, allowing you to correct the problem before it’s too late.

Concentrated reagent for use with the Reef Factory KH keeper Plus. This device collects water from the aquarium for testing, performs the automated test, and saves the result in the app. You can check the results and history of measurements in the app at any time.

The KH keeper is a smart automated alkalinity testing device that is able to not only test the alkalinity level in your aquarium, but can also notify you of issues. The use of the KH keeper means less manual testing, catching potential problems faster, and greater water chemistry stability for your aquarium inhabitants.

The pH meter is a device that monitors the pH level in your aquarium 24/7. Using the Reef Factory app, you can check the pH level in your aquarium at any time, from anywhere. If the pH reaches a value outside of your specified safe range, you will receive a notification immediately. The app also tracks and displays historical pH data.

a device that monitors the salinity level in your saltwater aquarium.

The display shows an accuracy of 0.1 points. Included is a high-quality probe that keeps calibrations for a long time and is designed for continuous operation. The box also contains a fluid for the first calibration of the device. 

In the Smart reef panel you can set up too high and too low salinity alarms.

Modern smart devices - apart from the traditional functionalities offered by other products, deliver numerous improvements in aquarium management, ensure safety and give access to important information, safeguarding the health of the animals kept in your marine aquarium.

The Reef Factory Level sensor is a compact and smart solution that utilizes a float switch to notify you of changes in water level via Reef Factory App. The Level sensor can be useful in many cases, including: