Produkter
Totalt antall treff i produkter:
Trykk for flere produkter.
No products were found.

Seachem MultiTest Phosphate

MultiTest™ Phosphate

Measures inorganic phosphate to less than 0.05 mg/L

Multi-cavity plate for simultaneous testing of up to 6 tests at the same time

Includes reference for test validation

Marine or freshwater

Les merShow less
kr 300.00
2-4 ukers leveringstid.
Bestillingsvare
Referanse:
970
Merke:
Ønskeliste
Beskrivelse

Phosphate in natural sea water ranges from less than 0.01 mg/L to 0.3 mg/L. For corals in reef aquaria, such phosphates should be 0.2 mg/L or less. Phosphates are non-toxic to fish and most invertebrates, but are ideally kept below 1 mg/L to minimize algae growth. In freshwater, phosphates are not critical and the allowable concentration is dependent on variables such as nitrate, manganese, iron, and vitamin concentrations, as well as the extent of use of live plants.

MultiTest™ Phosphate measures inorganic phosphate to less than 0.05 mg/L, producing a unique easy to read yellow-green-blue color range in marine and freshwater; however, usually, freshwater phosphate concentrations will be beyond the range of this kit, and dilutions of the sample with distilled water will be required. It performs over 75 tests and contains a reference sample for validation.

Features

75 Tests

MultiTest™ Phosphate performs over 75 tests

And with the multi-cavity test plate, multiple tests can be run at the same time.

Accuracy

Range

Measures between 0–3.0 mg/L phosphate

Precision

Detectable changes on the color chart in 0.001–0.1 mg/L increments

Reference Sample

It isn't necessary to run a reference test to use this kit; however, its proper performance can be validated by running a test in the normal manner except that the reference sample is used in place of aquarium sample. You might choose to run a reference test if you have cause to believe the test is giving incorrect results.

Color Chart

All MultiTest™ test kits come with an easy-to-read color chart. It features a 5 cm viewing window to help isolate color and match as closely as possible to the test sample

Opaque Multi-Cavity Test Plate

All MultiTest™ test kits are read from an opaque white test plate. The sliding color chart along with the six-cavity test plate allows for easy reading and comparisons of several samples at the same time.



MultiTest™ Phosphate Kit Contents

- Phosphate Reagent 1
- Phosphate Reagent 2
- Phosphate Reference
- Stir Rod
- Sample Pipette
- Phosphate Color Chart
- Multi-Cavity Test Plate
- Instructions

Les merShow less
Produktdetaljer
970
Anmeldelser
Ingen kommentarer

Legg igjen en anmeldelse

  • Forventning:
  • Kvalitet:
Beskriv dette produktet ved bruk av enkle og korte ord.
Last opp bilder:
Slipp bilder her eller trykk for å velge.
Sist vist
Bestillingsvare
kr 300.00

MultiTest™ Phosphate

Measures inorganic phosphate to less than 0.05 mg/L

Multi-cavity plate for simultaneous testing of up to 6 tests at the same time

Includes reference for test validation

Marine or freshwater

4 andre produkter i samme kategori:
Bestillingsvare
kr 300.00

MultiTest™ Iron

Measures iron to less than 0.05 mg/L

Multi-cavity plate for simultaneous testing of up to 6 tests at the same time

Includes reference for test validation

Marine or Freshwater

Bestillingsvare
kr 199.00

pH Alert™

Continuously monitors pH in freshwater

Seachem sensor technology

No tests, no strips

Lasts up to 4 times as long as competing products

Bestillingsvare
kr 300.00

MultiTest™ Silicate

Measures silicates to less than 0.5 mg/L

Multi-cavity plate for simultaneous testing of up to 6 tests at the same time

Includes reference for test validation

Marine and freshwater

Meny

Innstillinger

Opprett en gratis konto for å lage ønskelister.

Logg inn