Tunze Turbelle Stream 3+

Tunze Turbelle Stream 3+ For aquariums up to 3000 liters

- The new Tunze Stream 3+ fits for tanks with a glass thickness up to 19 mm.
- The Stream 3+ has an adjustable and removable flow angle to precisely match the flow in your tank. Thus, the Stream 3 can also be placed vertically and discreetly in a corner, deeper in the tank.
- With an acoustically optimized low-frequency propeller, the pump delivers the best possible hydraulic performance.
- The large suction basket with its massive latching hook, which is easy to remove, can be covered with a protective grid for small animals, anemones, etc.
- A hybrid holder with suction cup and magnet ensures optimal hold.
- The built-in wear-free, magnetic bearing ensures a non-contact radial bearing and thus neutralises the engine noise.
- The stream 3+ contains the well-known from the Stream 3, resistant outer housing in glossy finish.
- For aquariums up to 3000 liters
- Circulation performance 2500 l/h to approx. 15000 l/h
- Energy consumption: from 3,5 to max 50 W
- Power supply: 100 – 240 V / 50 – 60 Hz
- Cable length: 5 m
- Dimensions (L x W x H): 93 x 70,6 x 184 mm
- Silence Magnet Holder up to a glass thickness of 19 mm
- With flow deflector, protective grating and flow rectifier
- Electronically controllable synchronous motor pumps – Turbelle® Controller included

The Turbelle® controller is a device that is used to set the variable pump performance. It can provide a wave simulation, oscillation flow, an automatic search for the resonance frequency when the oscillation flow is used, and it is also equipped with a food timer.

It can be directly connected to a Multicontroller / SmartController 7000. The pump is therefore able to operate together with other pumps, for example, in the high/low tide mode.

If the Moonlight 7097.050 (not included in the scope of delivery) is attached to the Turbelle® controller, the night-mode operation will be activated automatically.

If this controller is connected to a second controller with the 7092.300 cable, a further pump can be connected and controlled, for example, to provide a wave pounding simulation or an oscillating current. A third controller can be added using the Y adapter cable 7090.300.

Turbelle® stream3 – customize your stream

The Turbelle® stream 3 precisely addresses the wishes of today’s aquaristics industry. It is also compact, powerful, versatile, and moreover absolutely quiet thanks to its special magnetic-bearing pump drive. The stream 3 is energy efficient.

With its innovative design, it can integrate almost invisibly into every aquarium. Thanks to the magnetic-bearing pump drive, its superior feature lies in the completely silent operation – even at higher power levels. With a consumption of just 3.5 to 50 W, its performance can be set between 2,500 (660 USgal./h) to 15,000 l/h (3,962 USgal./h).

It is delivered with the Turbelle® controller and a 5 m cable to the pump.
The Silence magnet holder ensures a fixation on every point of the aquarium glass pane.
The flow rectifier facilitates an additional flow length of more than 3 meters (118 in.) – ideal for long aquariums!
The 0.8 Hz FishCare function prevents injuries to fish or other living animals.
Every 24 hours, the pump automatically performs an 8-second backflushing operation with a capacity of 30%.