An unique HOB (Hang-on-Back) ATO integrated with one optical dual sensor and one replaceable Buit-in Anti-Siphon diaphragm pump, which is ideal for nano and pico aquariums under 200 liter
An unique HOB (Hang-on-Back) ATO integrated with one optical dual sensor and one replaceable Buit-in Anti-Siphon diaphragm pump, which is ideal for nano and pico aquariums under 200 liter
Integrated with Square Dual Sensor and built-in Anti-Siphon Diaphragm Pump provides efficiency, silent, and precise ATO process. It is extremely easy to install it on your aquarium— hang on tank, connect the tube, and plug and play.
Upgraded optical sensor designed for more precise detection of water level even at a distance of 0.3 mm and against false detection due to water drop and deposits.
Continuation of advantages in patented dual optical sensor, the failsafe sensor will be a backup and protect your tank immediately even the main sensor is failed.
With a built-in timer, the QST provides real-time failsafe protection, which can detect sensor or pump failure and avoid overfilling instantly without any complicated settings. With the intuitive LED indicator, you can know its status at a glance.
Equipped with high efficiency and low power consumption self-priming diaphragm pump, it can lessen the pressure to the aquarium system with stable operating performance and consistent smooth flow. The built-in anti-siphon valve can stop the forward siphon for 1 feet (30 cm) of water.
The toolless design allows you to assemble and disassemble in a minute. No screws means there is no risk of rusting your tank!
‘Hang-On-Back’ design is more convenient and flexible for rimmed and rimless tank/sump. Adjustable holder is fitted for 3-10 mm aquarium glass thickness.
The main body allows you to save as cable organizer.
You can quickly and easily adjust the cable length and mount the sensor at any desired places yourself with the easy-to-install magnetic sensor.
A Prefilter for removing the particles in the reservoir and protecting the pump for a high-performance lifetime.
Comes with a weighted base is made to fit perfectly over prefilter for keeping the water inlet securely and stability in place.
For small aquariums, a stable osmotic balance is important because they are particularly sensitive to constantly changing salt concentrations.
Smart ATO nano G2 is beautifully crafted to allow simple HOB installation and silent operation, which is designed specifically for nano and pico aquariums under 50 gallons.
Consolidating a stable and silent operation diaphragm pump and a dual optical sensor into one tiny packed. No wire in the reservoir, which makes your aquarium look neat and safe!
SPECIFICATIONS
Smart ATO nano G2 (SATO-276D)
- Power :
- Input : 100-240 VAC 50-60 Hz- Output : 12 VDC / 1A- Power Cable Length : 6 ft (180 cm) - DC Diaphragm Pump (Built-in Anti-Siphon Valve) :
- Suction Height : 6.5 feet (200 cm)- Max. Flow : 3.2 gph (12 lph)
- Max. Mounting Thickness :
- Sensor : 1/2 inch (12.7 mm)- Holder : 0.12-0.39 inch (3-10 mm) - Cable Length of Sensor : 1.5 feet (45 cm)
- Tubing :
- Length : 6.5 feet (200 cm)- ID : 5/32 inch (4 mm) / OD : 1/4 inch (6.4 mm)- The size is same as RO Tubing, suitable for ¼-inch RO Connector
INSTALLATION DIAGRAM
Legg igjen en anmeldelse