AutoAqua Smart ATO Lifter

An automatic filling system with outstanding performance!

The smart ATO Lifter is unique in its design, its user-friendly controls, its robust construction and its easy maintenance and installation.The smart ATO Lifter has powerful and efficient automatic filling functions, thanks to its silent AQUA Lifter pump and its brand-new water level detection device, which guarantees a high, regular and quantitative accuracy. With its ingenious design, the Smart ATO Lifter is also perfect for small aquariums.

Ultra-precise detection

The newly developed, highly sensitive, square, dual optical sensor for water level detection dramatically reduces the latency time, making it even more accurate every time the system automatically tops up the water! In addition, the sensor is extremely compact and has no moving parts to fail.

Extremely compact

The optical sensor is magnetically coupled with a magnet only 6.35 mm thick. It can be mounted on most clear, tinted or painted surfaces with a maximum thickness of 12.7 mm. The sensor works day or night, so it is safe to use when placed inside your aquarium cabinet or in the rear compartments of an all-in-one aquarium.

Optimized water filling

The AQUA-Lifter is a quiet, highly efficient, replaceable diaphragm pump that adds water gradually to achieve the desired level with precision, reducing stress on the aquarium ecosystem. It has a built-in anti-siphon valve to prevent forward siphoning. Compared to submersible pumps, diaphragm pumps have the advantage of operating safely without being submerged, so there are no cables in the water.

Efficient, reliable and well designed

The AQUA Lifter pump stand can be installed on aquariums with or without a rim, depending on the tank configuration. It can also be easily attached with a screw or nail to your aquarium cabinet or stand to reduce pump vibration.

Easy installation

The silicone seal helps reduce noise and vibration when operating the AQUA Lifter pump. Also, to avoid installation errors, the water inlet and outlet symbols are clearly marked.

Small, but very powerful!

Level detection is enhanced by the use of patented dual optical detection technology, which greatly reduces the risk of false detection due to water drops. This reduces specific failures such as overfilling and dry running of the pump.

The Smart ATO Lifter uses QST for real-time protection against any failure situation. QST can detect sensor, controller and empty tank malfunction. The Smart ATO Lifter issues an audible and visual alert at any time when it detects a fill time that is 6 times longer than the 1st fill time. For example, if the 1st fill time was 10 sec. then the controller will issue an alert when a fill time is greater than 60 seconds.

Specification

Power :

Power Input : 100-240 VAC 50-60 Hz

Power : 4.5 W @ DC 12 V

Power Cord Length : 6 ft (180 cm)

AQUA Lifter Pump (Built-in Anti-Siphon Valve) :

Suction Head : 6.5 ft (200 cm)

Flow Rate : 3.2 gph (12 lph)

Built-In Anti-Siphon Pressure : 1 feet (30 cm) max. height from water level of reservoir to tube outlet

Max. Mounting Thickness :

Sensor : 1/2 inch (12.7 mm)

AQUA Lifter Pump Holder : 1/2 inch (12.7 mm)

Length of Cable between Sensor and Controller : 6 ft (180 cm)

Tubing :

Length : 6.5 feet (200 cm)

ID : 5/32 inch (4 mm) / OD : 1/4 inch (6.4 mm)