RedSea Nitrite & Nitrate Marine Test Kit

NYOS REEFER test kits - taking measurements at the laboratory level at an attractive price

Water properties as close to nature are the key for every aquarium's success. However, monitoring relevant parameters in seawater is difficult due to numerous interfering ions. Therefore, test kits considering the specific characteristics of seawater are needed to analyze the water precisely. Nyos has developed a high sensitivity seawater nitrate test kit for the professional reefer.

• - Highly sensitive reagents
  - Professionally calibrated color chart
  - Differentiated color gradations
  - Precise sliding comparator
  - Sample tubes made of glass

The Aquaforest TestPro Pack includes drop tests to check levels of Ca, KH, and Mg in saltwater aquariums. Calcium, Alkalinity, and Magnesium are the most crucial parameters in a reef aquarium and should be monitored regularly. In order to ensure the proper functioning of the marine aquarium calcium levels should be maintained in the range 380-460 mg/l (ppm), Magnesium should fall between 1260-1460 mg/l (ppm), and alkalinity should vary between 6.5-8.0 dKH for Ultra Low Nutrient Systems (ULNS) or higher for aquariums with more nutrients.

MultiTest™ Silicate

Measures silicates to less than 0.5 mg/L

Multi-cavity plate for simultaneous testing of up to 6 tests at the same time

Includes reference for test validation

Marine and freshwater

Aquaforest TestPro KH is designed to quickly measure carbonate hardness in the marine aquariums. In order to ensure the proper functioning of the marine aquarium, alkalinity should vary between 6.5-8.0 dKH for Ultra Low Nutrient Systems (ULNS). Higher values are permissible for aquariums with higher nutrients. The set contains enough reagents to perform 78-100 determinations of carbonate hardness.

One Meter to Rule them All- Now with Bluetooth!

Accurately check pH, Alkalinity, Calcium, Low Range and High Range Nitrate, Ultra Low Range Nitrite, and Ultra Low Range Phosphate with one single, compact multiparameter tester. Then use the integrated Bluetooth to connect to the Hanna Lab App (via a compatible smart device) where you can log your results, add notes, share your data, and create method groups for future testing.