Connecting the Abyzz to Apex Interface cable is very simple. All that is required is an open variable speed port on an Apex System or expansion module. The 3.5mm female jack allows you to connect a 3.5mm to RJ45 cable (not included) directly into your Apex Controller.
Connect your Abyzz pump through the 0-10VDC variable speed ports with Apex Controllers. Coupling the Abyzz pump with an Apex Controller you can use Apex Fusion to do all your programming for 24-hour cycles, enable feed modes, and apply warnings and alarms.
Connecting the Abyzz to Apex Interface cable is very simple. All that is required is an open variable speed port on an Apex System or expansion module. The 3.5mm female jack allows you to connect a 3.5mm to RJ45 cable (not included) directly into your Apex Controller.
Specifications
- Rated Input -1w max
- Operating Voltage - 5VDC
- Serial to Serial Extension Cable Length - 72 inches
What's Included?
1x Serial to 3.5mm Converter Box
1x Serial to Serial Extension Cable
Note: Depending on your model of pump, a driver software update may be required. In this rare instance, Abyzz is more than happy to assist with the upgrade.
Connecting the Abyzz to Apex Interface cable is very simple. All that is required is an open variable speed port on an Apex System or expansion module. The 3.5mm female jack allows you to connect a 3.5mm to RJ45 cable (not included) directly into your Apex Controller.
The Abyzz Control System (ACS) is a control unit that allows you to control and monitor up to 8 Abyzz pumps* and other Abyzz peripherals via a common bus system. Furthermore, you can set permanent flow rates for each pump separately, create random flows or complex wave profiles.
Connection and decoupling kit for Abyzz A100.
Connection and decoupling kit for Abyzz A100.
titanium sensor for temperature measurement for connection to IPX / IPU* models
Light sensor for connection to the Abyzz Control System (ACS).
Cable length: 5.0 m
Suitable for Abyzz pump A200 and A400 – Conversion from feed pump to needle wheel pump
Stainless Steel Guard Grid perfect for your smaller pumps such as the Abyzz A400 protecting your livestock.
For connecting Abyzz peripheral devices.
Length: 1.8m
Inline strainer for A200 and A400 pumps
Stainless Steel Guard Grid perfect for your smaller pumps such as the Abyzz A100 and A200 protecting your livestock.
Abyzz AFC400 clamp kit to mount the AFC400/AFC1200 to a pipe
LS Extension for the connection between the Abyzz Control System (ACS) and the Abyzz light sensor (LS).
Length: 5,0 m
Logg inn først
Logg inn
Opprett en gratis konto for å lage ønskelister.
Logg inn
Legg igjen en anmeldelse