The Abyzz Control System (ACS) is a control unit that allows you to control and monitor up to 8 Abyzz pumps* and other Abyzz peripherals via a common bus system. Furthermore, you can set permanent flow rates for each pump separately, create random flows or complex wave profiles.
The Abyzz Control System (ACS) is a control unit that allows you to control and monitor up to 8 Abyzz pumps* and other Abyzz peripherals via a common bus system. Furthermore, you can set permanent flow rates for each pump separately, create random flows or complex wave profiles.
During operation, you have the option of requesting operating data such as driver temperature, identification data, power input, or the current speed of your pumps. If there is a fault (pump blockage, overtemperature, power failure, etc.) the ACS will give an alarm signal and alert you to any errors.
*Depending on the model, a software update of your drivers may be necessary, we will be happy to carry out this for you on request.
Special features
Applications
Display options
You can display the following information, among others:
Delivery
Dimensions ACS (mm): 180 x 160 x 48 mm
housing cut-out: 168 x 140 x 45 mm
Mounting: Surface or recessed mounting.
The Abyzz Control System (ACS) is a control unit that allows you to control and monitor up to 8 Abyzz pumps* and other Abyzz peripherals via a common bus system. Furthermore, you can set permanent flow rates for each pump separately, create random flows or complex wave profiles.
Suitable for Abyzz pump A200 and A400 – Conversion from feed pump to needle wheel pump
Stainless Steel Guard Grid perfect for your smaller pumps such as the Abyzz A400 protecting your livestock.
Abyzz AFC400 clamp kit to mount the AFC400/AFC1200 to a pipe
For connecting Abyzz peripheral devices.
Length: 1.8m
titanium sensor for temperature measurement for connection to IPX / IPU* models
Connection and decoupling kit for Abyzz A100.
Connection and decoupling kit for Abyzz A100.
LS Extension for the connection between the Abyzz Control System (ACS) and the Abyzz light sensor (LS).
Length: 5,0 m
Connecting the Abyzz to Apex Interface cable is very simple. All that is required is an open variable speed port on an Apex System or expansion module. The 3.5mm female jack allows you to connect a 3.5mm to RJ45 cable (not included) directly into your Apex Controller.
Stainless Steel Guard Grid perfect for your smaller pumps such as the Abyzz A100 and A200 protecting your livestock.
Light sensor for connection to the Abyzz Control System (ACS).
Cable length: 5.0 m
Inline strainer for A200 and A400 pumps
Logg inn først
Logg inn
Opprett en gratis konto for å lage ønskelister.
Logg inn
Legg igjen en anmeldelse