Turbelle Nanostream 6020
German-made Tunze compact circulation pump with synchronous motor pump. Small design can be easily hidden in the aquarium. Flow deflector provides a wide water jet to a offer a 3D adjustability at the pump outlet. Special magnet holder does not transfer vibration to glass for super quiet operation.
Tunze Turbelle Nanostream 6020 Features
- - Small design are easy to hide in your aquarium set up.
- They rotate to a wide range of angles for targeted flow.
- Low power consumption
- Special magnet holder do not touch aquarium glass directly resulting in no vibrations to tank and virtually no noise
- Flow Deflector allows for a wide water jet
- Maintenance free - "Self-Cleaning System"
High flow is very important to maintaining a thriving healthy aquarium. Aquariums with poor flow can experience a number of easily avoidable health issue. Using high flow powerheads in your aquarium will:
- - Significantly decrease the risk of algae outbreaks.
- Keep waste and particles suspended longer so skimmers and filters have a better chance of removing them.
- Prevent toxic pockets from forming in hard to reach areas.
- Keep debris from collecting on corals.
- Keep food suspended longer so you can add less food.
- Increase the chances of long term healthy tank success.
Specifications
- - For aquariums from 40 to 250 liters
- Flow rate: 2,500 l/h
- Energy consumption: 4W
- Voltage/frequency: 115v/60Hz
- Dimensions without flow deflector: 65 x 60 x 72 mm
- Output diameter ø40 mm
- Pump magnet for up to 12mm glass
QUICK COMPARE - TUNZE POWERHEAD PUMPS |
||||||||
| Model | Flow Rate (LPH) |
Energy Use | Diameter | Output Diameter | Controllable | Tank Size (Recommended) |
||
|---|---|---|---|---|---|---|---|---|
| Turbelle Nanostream 6015 | 1.800 | 5W | ø70mm | Ø40/15mm |
No |
40-200 Liters | ||
| Turbelle Nanostream 6020 | 2.500 | 5W | ø70mm | Ø40/15mm |
No |
40-250 Liters | ||
| Turbelle Nanostream 6025 | 2.800 | 5W | ø70mm | Ø40/15mm |
No |
40-200 Liters | ||
| Turbelle Nanostream 6040 | 200-4.500 | 5W | ø70mm | Ø40/15mm |
Yes |
20-500 Liters | ||
| Turbelle Nanostream 6045 | 1.500-4.500 | 5-7W | ø70mm | Ø40/15mm | Adjustable | 40-500 Liters | ||
| Turbelle Nanostream 6055 | 1.000-5.500 | 4-18W | ø70mm | Ø40/15mm | Yes | 40-500 Liters | ||
| Turbelle Stream 6065 | 6.500 | 12W | ø90mm | ø50mm | No | 250-800 Liters | ||
| Turbelle Stream 6085 | 8.000 | 14W | ø90mm | ø50mm | No | 400-1.000 Liters | ||
| Turbelle Stream 6105 | 3.000-12.000 | 35W | ø90mm | ø63mm | Yes | 200-2.000 Liters | ||
| Turbelle Stream 6125 | 12.000 | 22W | ø90mm | ø63mm | No | 400-2.000 Liters | ||
| Turbelle Stream 6255 | 5.000-17.000 | < 58W | ø90mm | ø75mm | Yes | up to 4.000 Liters | ||
Kunder som kjøpte dette produktet kjøpte også:
Bestillingsvare
kr 800.00
Temperature compensating refractometer with LED illuminated scale for salinity determination
Bestillingsvare
kr 710.00
A TDS Meter measures the amount of Total Dissolved Solids (TDS) in a solution.
This measurement is used to determine the purity of the water produced by your RO unit and will give an indication of when your DI resin or membrane life is coming to an end. The inline version measures the TDS of the feed water before the RO Unit and the TDS of the pure water from the unit.
Since dissolved ionized solids like salts and minerals contribute to the conductivity of a solution, a TDS meter measures the conductivity of the solution which is then converted to a TDS reading.
TDS is directly related to quality of water i.e., the lower a TDS figure, the more pure the water. As an example, reverse osmosis purified water will have a TDS between 0 and 10, whereas tap water will vary between 20 and 300.
3 andre produkter i samme kategori:
Legg igjen en anmeldelse