Neptune Systems Lab Grade Conductivity/Salinity Probe
Start Measuring Salinity in Your Reef
Replace an old probe or add salinity monitoring to your Apex Aquarium Controller. Maintaining consistent salinity in your aquarium is key to the well-being of every organism inside it. Often, we're so busy that we overlook changes in the salinity of our reef aquarium until problems arise. With real-time salinity monitoring, you can be alerted to potential issues and do something about it.
No Salinity Port? No Problem!
If your Apex doesn't have a salinity probe port, you can easily add one with the separately available PM2 Salinity Module. The PM2 Features a salinity probe port, temperature probe port, and an I/O port.
Use the Right Calibration Solution (sold separately)
For Saltwater: 53000 µS Conductivity Solution
For Freshwater: 447 µS Conductivity Solution
12 andre produkter i samme kategori:
Bestillingsvare
kr 980.00
- - Flow-sensor 1"
- - Suitable for pipe diameters 25mm and 32mm
- - Used with a return pump
- - Compatible with FMM Module
- - Does not come with PVC connectors
Bestillingsvare
kr 1,500.00
Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junction to contaminate the electrolyte surrounding the reference electrode.
Bestillingsvare
kr 440.00
- - Flow-sensor 1/2 inch
- - Suitable for pipe diameters of 20mm
- - Compatible with FMM Module
- - Works with flow rates from 115-950 l/h
- - Does not come with PVC connectors
Bestillingsvare
kr 620.00
Long-life Temperature Probe - replace your Temperature Probe, add one for another tank, or put one on your PM2/PM3 module for temperature compensated readings.
Bestillingsvare
kr 550.00
Be notified if there is ever a leak before it turns into a disaster. Connecting the LD-1 Leak Detector to the FMM module will allow your Apex Controller to notify you if water ever touches the sensor. There are many applications for leak detectors from water on floor warnings, skimmer cup overflows and much more.
Bestillingsvare
kr 0.00
- - Flow-sensor 2"
- - Suitable for pipe diameters 32mm, 40mm and 50mm
- - Used with a return pump
- Does not come with PVC connectors
Bestillingsvare
kr 15,400.00
- - Probe which measures dissolved oxygen in the water
- - ONLY works with Dissolved Oxygen Module - PM3
- - Certified and lab graded
- - Membranes are replaceable
Bestillingsvare
kr 390.00
- - Flow-sensor 1/4"
- - Suitable for tubes of 4mm
- - Used with FMM Module
- - Internal diameter: 7mm
Bestillingsvare
From
kr 850.00
The Neptune LLS is a first of its kind industry exclusive! While most liquid level sensors simply measure the presence or absence of liquid at a predetermined sensor height, the LLS is one continuous vertical sensor that can identify the exact depth of a liquid in both inches and centimeters at any given time. This increased sensitivity in measurement can help you identify and be alerted of changes in evaporation, consumption, and dosing levels within sumps, ATO reservoirs, AIO tanks, dosing containers, mixing stations, and more.
Legg igjen en anmeldelse