Bestillingsvare
kr 390.00
- Flow-sensor 1/4"
- Suitable for tubes of 4mm
- Used with FMM Module
- Internal diameter: 7mm
Neptune Systems 1/4" Flow Sensor FS25
- - Flow-sensor 1/4"
- - Suitable for tubes of 4mm
- - Used with FMM Module
- - Internal diameter: 7mm
kr 390.00
Referanse:
NS-FS-25-L
Merke:
Ønskeliste
The Neptune Systems Flow Sensor 1/4" Push-fit Connectors is a flow sensor suitable for tubes of 4mm. Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses push-fit connectors to make connecting to your system as simple as possible. The FS-25 will work with flow rates from 3-12 gph.
*Needs to be connected to FMM module to work
12 andre produkter i samme kategori:
Bestillingsvare
kr 0.00
- Flow-sensor 2"
- Suitable for pipe diameters 32mm, 40mm and 50mm
- Used with a return pump- Does not come with PVC connectors
Bestillingsvare
kr 980.00
- Flow-sensor 1"
- Suitable for pipe diameters 25mm and 32mm
- Used with a return pump
- Compatible with FMM Module
- Does not come with PVC connectors
Bestillingsvare
kr 1,500.00
Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it...
Bestillingsvare
kr 550.00
Be notified if there is ever a leak before it turns into a disaster. Connecting the LD-1 Leak Detector to the FMM module will allow your Apex Controller to notify you if water ever touches the sensor. There are many...
Bestillingsvare
kr 440.00
- Flow-sensor 1/2 inch
- Suitable for pipe diameters of 20mm
- Compatible with FMM Module
- Works with flow rates from 115-950 l/h
- Does not come with PVC connectors
Bestillingsvare
kr 15,400.00
- Probe which measures dissolved oxygen in the water
- ONLY works with Dissolved Oxygen Module - PM3
- Certified and lab graded
- Membranes are replaceable
Bestillingsvare
From
kr 850.00
The Neptune LLS is a first of its kind industry exclusive! While most liquid level sensors simply measure the presence or absence of liquid at a predetermined sensor height, the LLS is one continuous vertical sensor...
Bestillingsvare
kr 620.00
Long-life Temperature Probe - replace your Temperature Probe, add one for another tank, or put one on your PM2/PM3 module for temperature compensated readings.
Legg igjen en anmeldelse