Produkter
Totalt antall treff i produkter:
Trykk for flere produkter.
No products were found.

Neptune Systems Dissolved Oxygen Probe

  • - Probe which measures dissolved oxygen in the water
  • - ONLY works with Dissolved Oxygen Module - PM3
  • - Certified and lab graded
  • - Membranes are replaceable
Les merShow less
kr 15,400.00
2-4 ukers leveringstid.
Bestillingsvare
Referanse:
NS-PRBDO
Ønskeliste
Relaterte produkter
Beskrivelse

Of all the organisms in your aquarium, large fish are the most acutely at risk to low O2 levels. In some situations with heavily loaded systems, simply the failing of a skimmer can bring the O2 levels down to dangerous levels and cause a chain-reaction fish die-off . This is where the PM3 Dissolved Oxygen module comes to the rescue.

The Neptune Systems Dissolved Oxygen Probe is a probe which measures dissolved oxygen in the water. This probe is meant for the Dissolved Oxygen Module - PM3. The probe is certified and lab graded. The membranes in the probe are replaceable as well, which should be changed every three months.

 

* The Dissolved Oxyen probe ONLY works with the PM3 module

Les merShow less
Produktdetaljer
NS-PRBDO
Anmeldelser
Ingen kommentarer

Legg igjen en anmeldelse

  • Forventning:
  • Kvalitet:
Beskriv dette produktet ved bruk av enkle og korte ord.
Last opp bilder:
Slipp bilder her eller trykk for å velge.
Sist vist
12 andre produkter i samme kategori:
Bestillingsvare
From kr 850.00

The Neptune LLS is a first of its kind industry exclusive! While most liquid level sensors simply measure the presence or absence of liquid at a predetermined  sensor height, the LLS is one continuous vertical sensor that can identify the exact depth of a liquid in both inches and centimeters at any given time. This increased sensitivity in measurement can help you identify and be alerted of changes in evaporation, consumption, and dosing levels within sumps, ATO reservoirs, AIO tanks, dosing containers, mixing stations, and more.

Bestillingsvare
kr 1,500.00

Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junction to contaminate the electrolyte surrounding the reference electrode.

Bestillingsvare
kr 550.00

Be notified if there is ever a leak before it turns into a disaster. Connecting the LD-1 Leak Detector to the FMM module will allow your Apex Controller to notify you if water ever touches the sensor. There are many applications for leak detectors from water on floor warnings, skimmer cup overflows and much more.

Meny

Innstillinger

Opprett en gratis konto for å lage ønskelister.

Logg inn