Produkter
Totalt antall treff i produkter:
Trykk for flere produkter.
No products were found.

Hanna Cleaning Solution 20ml

HI-700601P is a general purpose cleaning solution usable in a variety of applications and now available in easy-to-use 20ml sachets.

Les merShow less
kr 35.00
På lager 17 Produkter
Referanse:
HI-700601P
Ønskeliste
Beskrivelse

HI-700601 Hanna Electrode Cleaning Solution - 20ml

HI-700601P is a general purpose cleaning solution usable for a variety of applications and now available in easy-to-use 20ml sachets.

The single dose sachets are really handy with each sealed sachet holding just the right amount of solution. Each time a meter or electrode is cleaned using the Hanna sachets, it is like using a newly opened bottle of solution!

Electrodes become dirty from use and will produce inaccurate results even if they read correctly in a pH buffer. Hanna's cleaning solutions eliminate impurities and residues which are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly.

At Hanna, we suggest cleaning the bulb and junction of your electrode on a regular basis in our ready-to-use cleaning solutions to ensure that the probe is always clean and to prevent any clogging of the junction.

All cleaning solutions are packaged in an air tight bottle with tamper-proof seal to ensure quality and freshness. All solutions show a batch number and expiry date.

Useful tips:

After cleaning, rinse the electrode in tap water and then place in a Hanna Storage Solution before calibrating or taking measurements. Always follow up with a Hanna Buffer/calibrating Solution for the best results.

Remember:

Cleaning is a fast and effective routine which should be performed on a regular basis as a preventative measure against using dirty equipment. Always clean the junction and bulb of the electrode Always clean your meter, electrode or probe before calibration The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, modern pH meters assume that the electrode is clean and will give you a starting point accordingly. So, if you haven't cleaned your meter, your readings will be inaccurate from the start.

All ready-to-use cleaning solutions are made with the highest quality of materials and chemicals complying with standards set by the National Institute of Standards and Technology (NIST), to ensure quality and accuracy. Also available in light blocking bottles to prevent against degradation by UV light compatible with FDA Standards (US Food and Drug Administration) - HI-8061L.

Les merShow less
Produktdetaljer
HI-700601P
Anmeldelser
Ingen kommentarer

Legg igjen en anmeldelse

  • Forventning:
  • Kvalitet:
Beskriv dette produktet ved bruk av enkle og korte ord.
Last opp bilder:
Slipp bilder her eller trykk for å velge.
Sist vist
Kunder som kjøpte dette produktet kjøpte også:
Bestillingsvare
kr 3,999.00

a device that monitors the salinity level in your saltwater aquarium.

The display shows an accuracy of 0.1 points. Included is a high-quality probe that keeps calibrations for a long time and is designed for continuous operation. The box also contains a fluid for the first calibration of the device. 

In the Smart reef panel you can set up too high and too low salinity alarms.

16 andre produkter i samme kategori:
Bestillingsvare
kr 600.00

Ensure the performance of your HI702 High Range Copper Checker with the HI702-11 Copper Standards. Each kit includes two cuvettes, one sealed cuvette that will read at 0ppm of copper, and then another cuvette that is tinted to an equivalent of 2.0ppm (± 0.10) @ 25°C. Each set it checked at Hanna's state of the art facility, and guarantees each set of calibration standards. 

Bestillingsvare
kr 350.00

Ensure the performance of your HI781 Low Range Nitrate Checker with the HI781-11 Low Range Nitrate Calibration Check Set. Each kit includes two cuvettes, one cuvette for zeroing the checker, and then another cuvette with a certified standard reference solution.This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date to provide traceability when certifying the Checker.

Bestillingsvare
kr 330.00

The HI-740157P disposable plastic pipettes allow for safe, convenient, and precise transfer of solutions. The plastic, unified design of the pipette is convenient for every day lab tasks, for instance: quickly refilling or topping up electrolyte solution or simple on-the-spot tests. The disposable plastic pipettes ensure there is adequate head pressure for measurements.

Meny

Innstillinger

Opprett en gratis konto for å lage ønskelister.

Logg inn