Produkter
Totalt antall treff i produkter:
Trykk for flere produkter.
No products were found.

Hanna HI731318 Cuvette Cleaning Cloths

kr 350.00
2-4 ukers leveringstid.
Bestillingsvare
Referanse:
HI731318
Ønskeliste
Beskrivelse
HI731318 are microfiber cloths for wiping the cuvettes used in Checker HC (HI700 series) handheld colorimeters, photometers (HI96000 portable series and HI83000 benchtop series) and turbidity meters. These cloths remove dirt, grease and fingerprints from the vials so that the glass is clean for the unimpeded transmission of light.

  • - Lint free
    - Will not scratch glass cuvettes

Using cuvettes in photometers, colorimeters, and turbidity meters that are clean and free from scratches is critical in order to obtain an accurate measurement. These systems are optically based in which light must transmit through the glass vial in order to be detected by a silicon photodetector. Any impedance in the light path will affect the way that light will interact with the sample to be measured ultimately affecting the result obtained from the meter. Using clean HI731318 microfiber cloths will not scratch the cuvettes which can interfere with the optical system.

Les merShow less
Produktdetaljer
HI731318
Anmeldelser
Ingen kommentarer

Legg igjen en anmeldelse

  • Forventning:
  • Kvalitet:
Beskriv dette produktet ved bruk av enkle og korte ord.
Last opp bilder:
Slipp bilder her eller trykk for å velge.
Sist vist
16 andre produkter i samme kategori:
Bestillingsvare
kr 330.00

The HI-740157P disposable plastic pipettes allow for safe, convenient, and precise transfer of solutions. The plastic, unified design of the pipette is convenient for every day lab tasks, for instance: quickly refilling or topping up electrolyte solution or simple on-the-spot tests. The disposable plastic pipettes ensure there is adequate head pressure for measurements.

Bestillingsvare
kr 600.00

Ensure the performance of your HI702 High Range Copper Checker with the HI702-11 Copper Standards. Each kit includes two cuvettes, one sealed cuvette that will read at 0ppm of copper, and then another cuvette that is tinted to an equivalent of 2.0ppm (± 0.10) @ 25°C. Each set it checked at Hanna's state of the art facility, and guarantees each set of calibration standards. 

Bestillingsvare
kr 350.00

Ensure the performance of your HI781 Low Range Nitrate Checker with the HI781-11 Low Range Nitrate Calibration Check Set. Each kit includes two cuvettes, one cuvette for zeroing the checker, and then another cuvette with a certified standard reference solution.This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date to provide traceability when certifying the Checker.

Meny

Innstillinger

Opprett en gratis konto for å lage ønskelister.

Logg inn