Hanna Checker HI713-11 Phosphate LR Calibration Check Set
Easily calibrate and test proper functionality of your Hanna Checker HI713 Phosphate Low Range for fresh and marine water (saltwater).
- - Contains Standard A, Standard B and 1 Packet 713-25 Reagent*
- Follow instructions in packaging
- Acceptable results must be between 0.92 and 1.08 ppm at 25°C
*Attention: 1.00 ppm standard cuvette can be used only once.
Hanna Checker Instructions for Phosphate LR Standards:
- 1. Thoroughly wipe standard cuvette with HI731318 lint free cloth and only handle using top of cuvette. The cuvette wall must be dry and free of smudges.
- 2. Open B, HI713-11 standard cuvette and add 1 packet of HI713-25 reagent using the procedure from the instructions (including timing).
- 3. At the C.1 prompt, place A, HI713-11 into the holder of the Checker and press operations button.
- 4. At the C.2 prompt, place B, HI713-11 standard cuvette as prepared above into the holder of the Checker and press operations button.
- Acceptable results must be between 0.92 and 1.08 ppm at 25°C
- *Attention: 1.00 ppm standard cuvette can be used only once.
16 andre produkter i samme kategori:
På lager
kr 35.00
HI-700601P is a general purpose cleaning solution usable in a variety of applications and now available in easy-to-use 20ml sachets.
Bestillingsvare
kr 250.00
The pH electrode storage cap with compression fitting is only suitable for use with pH electrodes with a 12mm stem diameter.
Bestillingsvare
kr 160.00
The HI731349P is a 10 piece set of 100 µL plastic pipette tips that can be used with the HI731339P Graduated Pipette. The pipette and disposable tips are designed to measure and transfer fixed volumes of liquids that require precise dosing.
Bestillingsvare
kr 99.00
10 ml Syringe with Luer Lock used in Hanna HI781 Nitrate Checker
Bestillingsvare
kr 299.00
The HI740271 is a replacement filter holder with Luer lock (1 pc.) for use with the HI781 Low Range Marine Nitrate Checker.
Bestillingsvare
kr 350.00
Ensure the performance of your HI781 Low Range Nitrate Checker with the HI781-11 Low Range Nitrate Calibration Check Set. Each kit includes two cuvettes, one cuvette for zeroing the checker, and then another cuvette with a certified standard reference solution.This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date to provide traceability when certifying the Checker.
Legg igjen en anmeldelse