Hanna HI755-11 Alkalinity Calibration Check Set
Easily calibrate and test proper functionality of your Hanna Checker HI755 Alkalinity for marine water.
- - Contains Standard A and Standard B
- Follow instructions in packaging
- Acceptable results must be between 90 and 110 ppm at 25°C
Hanna Checker Instructions for Marine Alkalinity Standards:
- 1. Thoroughly wipe standard cuvette with HI731318 lint free cloth and only handle using top of cuvette. The cuvette wall must be dry and free of smudges.
- 2. At the C. 1 prompt, place A, HI755-11 standard cuvette into the holder of the Checker and press operations button.
- 3. At the C. 2 prompt, place B, HI755-11 standard cuvette into the holder of the Checker and press operations button.
- Acceptable results must be between 90 and 110 ppm at 25°C
16 andre produkter i samme kategori:
Bestillingsvare
kr 160.00
The HI731349P is a 10 piece set of 100 µL plastic pipette tips that can be used with the HI731339P Graduated Pipette. The pipette and disposable tips are designed to measure and transfer fixed volumes of liquids that require precise dosing.
Bestillingsvare
kr 299.00
The HI740271 is a replacement filter holder with Luer lock (1 pc.) for use with the HI781 Low Range Marine Nitrate Checker.
Bestillingsvare
kr 600.00
Ensure the performance of your HI702 High Range Copper Checker with the HI702-11 Copper Standards. Each kit includes two cuvettes, one sealed cuvette that will read at 0ppm of copper, and then another cuvette that is tinted to an equivalent of 2.0ppm (± 0.10) @ 25°C. Each set it checked at Hanna's state of the art facility, and guarantees each set of calibration standards.
Bestillingsvare
kr 250.00
The pH electrode storage cap with compression fitting is only suitable for use with pH electrodes with a 12mm stem diameter.
Bestillingsvare
kr 150.00
HI740228 is a filter disc; part of accessory kit for preparation of samples to be analyzed with the HI781 Hanna Nitrate Checker photometers.
Legg igjen en anmeldelse